Technical Specifications

KAD K7

High-end Active Digital Loudspeaker System

• Custom build plate amplifier (upgradeable)
• High-resolution (24bit/96kHz) digital signal processing
• Active and passive Directivity Control
• Bit perfect, lossless connectivity with WiSA certified companion transmitter
• Automatic WiSA configuration management from
  2.0 to 7.1
• Remote control app

• High-end WMTMW driver configuration with extra rear firing Woofer units for cardioid-like bass optimization
• 32bit Sigma DSP; double TI Burr Brown 32-bit/384kHz DAC and 4 channels Ncore® amplification (100W 1%THD for Tweeter; 250W 1% THD for Mids, 500W 1% THD for Woofers)
• Increased dynamic range with D’Apollito inspired MTM mid section. Active front bass control for reduced floor bounce

Enclosure:                             Closed (Q= <0.7

Frequency response:          20 - 35.000 Hz

Crossover frequencies:      245 Hz / 3000 Hz

Tweeter:                                1x SEAS DXT Alu dome, wide dispersion control

Midrange:                             2x SEAS Excel, Magnesium cone - 120 mm

Woofer, front:                      2x A-704 Alu cone, long throw (Xm=12.5cm) - 180 mm Ø

Woofer, rear:                       2x A-704 Alu cone, long throw (Xm=12.5cm) - 180 mm Ø

Output power (total):       850W RMS @1%THD

Connectivity:                      WiSA, S/PDIF (optical)

Size (h x w x d):                 120 x 21 x 37 cm

Weight:                                40,0 kg

Connecting the KAD K7 Loudspeaker System

K7 WiSA connectivity diagram, requires an additional KAD Connect (WiSA transmit unit)